APEX
®
3 SERIES TIG PENDANT MANUAL
Users
The Users Screen shown in FIGURE 40 - Users
Screen – allows the user to set up operator and ad-
ministrator log in codes. Each user can be assigned an
individual code which determines the level of access.
Fast Movement
Using the steering knob, Fast Movement is enabled on
this screen. In addition, use the steering knob or the
left and right toggles for navigation and selection.
Adding Users
Only those with supervisor access are able to view the
users screen.
FIGURE 40 - Users Screen
Press the Add User Selection button. As demonstrated
in FIGURE 41 - Add User, pressing the Add Selection
button will bring up the Add User screen.
Note: Toggle switches do not work on the Add User
Screen – only the steering knob.
FIGURE 41 - Add User
Once the code has been selected, the supervisor can
determine the user's level of access.
Operator
The operator has no access to the settings and will
only be able to operate within the parameters placed
by the supervisor for each program.
Supervisor
The supervisor has full rights and access to all welding
parameters and setup screens.
A-41
OPERATION