Flexible Hose - Hoover 7000PH Allergy Instruction Manual

Assembly
IMPORTANT! Always remove the power plug from the power supply before fitting
or removing accessories!
Note: when not using the powerhead, ensure that the Powerhead On/Off Button
on the handle is in the "Off" position.

1. Flexible Hose

Fitting:
Insert the flexible hose into the hose inlet of the vacuum. Press until it clicks
into position.
Removing:
Press the two buttons and gently pull to release the flexible hose.
2. Handle & Rod
Note: Ensure that the Powerhead On/Off Button on the handle is in
the "Off" position before fitting the handle to the rod.
a. Gently insert the handle into the telescopic tube and push until it
clicks into place.
b. Place the powerhead onto the floor and gently insert the telescopic
tube into the powerhead. Push until it clicks into place.
7.