Related Manuals for Hoover allergy 7011PH
Summary of Contents for Hoover allergy 7011PH
- Page 1 Bagless Vacuum Cleaner with Deep Cleaning Powerhead Carbon & HEPA Filtration Multi-Cyclonic Technology Self-Propelling Powerhead...
-
Page 3: Specifications
7011PH Allergy Congratulations on the purchase of your new HOOVER vacuum cleaner. There are many useful features built into your vacuum cleaner. We recommend that you carefully read this instruction manual for the best results. Features: Handle 10. Dust Container Release Button 2. -
Page 4: Before You Begin
Before you Begin This cleaner must be operated in accordance with these instructions and used only for domestic household cleaning to remove DRY dirt and dust from household carpets, flooring, walls and fabrics. This cleaner is not fit to be used as an industrial cleaner and will void the manufacturer’s warranty if used inappropriately. -
Page 5: Safety Precautions And Warnings
Safety Precautions & Warnings IMPORTANT! Always switch off the cleaner and remove the power plug from the electricity power supply before cleaning your appliance, when not in use or attempting any maintenance task. The cleaner must only be connected to an AC power supply at the voltage shown on the rating label. - Page 6 17. To prevent electrical shock, do not use the 27. Never attempt to make any modifications to the vacuum cleaner outdoors or on wet surfaces. vacuum cleaner. 18. Extreme caution should be exercised when 28. Always store the appliance indoors, in a cool, using the appliance on stairs.
-
Page 7: Flexible Hose
Assembly IMPORTANT! Always remove the power plug from the power supply before fitting or removing accessories! LIVE PARTS within the hose, rod and powerhead. 1. Flexible Hose Fitting: Insert the flexible hose into the hose inlet of the vacuum. Press until it clicks into position. -
Page 8: Crevice Tool
Accessories Powerhead Powerhead Height Adjustment Button Deeply cleans carpets by effectively lifting and removing deeply embedded dust and dirt. The height of the powerhead can be adjusted to be used on different types of carpet. Note: not recommended for use on hard floors. WARNING! Seek advice from carpet manufacturers before using the motorised powerhead on woollen or delicate carpets. -
Page 9: Upholstery Tool
Upholstery Tool For vacuuming furniture and upholstery. Mini Hand Turbo Tool Ideal for removing per hair from upholstery and furniture. This accessory features a transparent case so that you can easily see and remove any blockages that may occur. Safety Precautions: Keep hair, hands and feet away from the rotating brush while the turbo brush is running. -
Page 10: Using The Handle
Instructions for Use IMPORTANT! Always remove the power plug from the power supply before fitting or removing accessories. Turning On/Off the Cleaner 1. Unwind a sufficient length of cable. The yellow mark on the power cable shows the ideal cable length. DO NOT extend the cable beyond the red mark. -
Page 11: Maintenance
Maintenance IMPORTANT! Always remove the power plug from the power socket before performing any maintenance. Vacuum Cleaner Storage When not in use, ensure that the cleaner is disconnected from to the power supply and that the cable is fully retracted. The combination floor tool can be stored in the floor park clip. The powerhead must be stored separately. - Page 12 Maintenance (continued) Cleaning the Mini Hand Turbo Brush WARNING! Ensure the Mini Hand Turbo Brush is disconnected from the cleaner when performing any maintenance. To remove the clear cover the collar lock must be in unlocked by twisting the collar lock anticlockwise. The rotating bristles must be unlocked and in the upward position.
- Page 13 Replace the clear cover. Lock the collar lock by twisting clockwise. Rotate the rotating bristles to the downward position and lock into place by pushing the lock button on the side of the turbo brush to the upward position. Cleaning and Replacing the Pre-Motor Filter IMPORTANT! Always remove the power plug from the power supply before fitting or removing accessories.
-
Page 14: Blockage Indicator
Maintenance (continued) Blockage Indicator If the Blockage Indicator light turns red, this indicates that there is a blockage in the cleaner. If this happens, switch off the cleaner and remove the power plug from the power supply. Check that there are no blockages in the filters, hose and hose inlet. - Page 15 Cleaning the Agitator Bar WARNING! Ensure that the cleaner is disconnected from the power supply and the powerhead is disconnected from the rod before performing any maintenance. Note: The agitator bar must be free of debris for effective cleaning and for maximum suction. 1.
- Page 16 Maintenance (continued) Replacing the Powerhead Drive Belt & Agitator Bar WARNING: To reduce the risk of electric shock, ensure that the power is switched off and the power plug is disconnected from the power supply before performing any cleaning, maintenance or troubleshooting checks. Failure to do so may result in electric shock or personal injury.
- Page 17 Slide the old belt off the drive shaft and then the end cap. If the belt is broken, remove all the broken pieces. Place the new belt over the drive shaft first and then the end cap. Make sure the lettering on the belt is outward facing. Insert the end cap into the groove.
-
Page 18: Spare Parts
Spare Parts Please contact Hoover Customer Care: 1300 360 845 (AUS) 0800 387 442 (NZ) to find your local spare parts provider. Part Part Number Hose 31220477 Dust Bin 33151826 Power Head 11400129 32200888 Filter (Pre-motor & Rear Motor Filters) -
Page 19: Troubleshooting
Troubleshooting Problems and Solutions If you come across a problem, please use the checklist of troubleshooting tips before ringing Hoover Customer Care 1300 360 845 (AUS) 0800 387 442 (NZ) Fault Solutions The cleaner will not Check that the power cable is inserted securely; remove from the power supply turn on. - Page 20 Bagless Vacuum Cleaner with Deep Cleaning Powerhead Conditions of warranty Your Hoover cleaner, in the case of domestic use, has a two years Hoover Floorcare is unable to accept responsibility under this parts and labour warranty against product defects and failures when...