Alarms - Humminbird PiranhaMAX 165 Installation And Operation Manual

Alarms

Alarms are based on the limits you set for a device, such as battery voltage,
depth, and more. Set the alarms that apply to your PiranhaMAX installation
and configuration. See the Alarms table for a complete list of PiranhaMAX
alarms.
To Set an Alarm:
1. Press the POWER/MENU key.
2. Select SETUP and press the CHECK/ENTER key.
3. Select ALARMS and press the CHECK/ENTER key.
4. Select an alarm and press the CHECK/ENTER key to activate the menu.
5. Press the UP or DOWN Arrow key to select an alarm setting.
6. Press the POWER/MENU key or the CHECK/ENTER key to confirm the
selection.
7. Close: Press the POWER/MENU key until the menu system is closed.
NOTE: When an alarm is triggered, you can silence it by opening the Alarms menu and
turning the alarm off.
Alarms
60