Removing The Drop-In Door Trim Pieces; Removing The Snap-On Door Trim; Using The Flip-Up Door Shelf - Roper RT16DKXDN03 Use And Care Manual

Removing the drop-in door trim pieces
To remove the trim piece:
1. Remove all items from the shelf.
2. Pull straight up on the trim piece at
each end.
TO replace the trim piece:
1. Locate each end of the trim piece above
the trim pocket opening.
2. Push the trim piece straight down until
it stops.
__==:
3.
Replace items on the shelf.
-
Removing the snap-on door trim
To remove the trim piece:
1. Remove all items from the shelf.
2. Pull Out on the inside tab at each end of
the trim piece.
3. Lift trim piece straight out.
To replace the trim piece:
1. tine up ends of the trim piece with the
button on the door liner wall.
2. Push trim piece straight back until it
snaps securely into place,
3. Replace items on the shelf.
Using the flip-up door shelf
(On some
models)
The shelf bottom flips up so you can store
k&w kms in the door shelf below. When in
the down position, the shelf is strong enough
to hold up to 10 pounds.
11