Removing The Drop In Door Trim Pieces; Removing The Snap On Door Trim; Using The Flip Up Door Shelf - Roper RT20DKXDN00 Use And Care Manual

Removing the drop in door trim pieces
To remove the trim piece:
1.
Remove all items from the ehelf.
2. Pull straight up on the trim piece at
each end.
To replace the trim piece:
1.
Locate each end of the trim piece above
the trim pocket opening.
2. Push the trim piece straight down until
it stops.
3. Replace items on the shelf.
Removing the snap on door trim
To remove the trim piece:
1. Remove all items from the shelf.
2. Pull out on the inside tab at each end of
the trim piece.
3. Lii trim piece straight out.
To replace the trim piece:
1.
Line up ends of the trim piece with the
button on the door liner wall.
2. Push trim piece straight back until it
snaps securely into place.
3. Replace items on the shelf.
Using the flip up door shelf
(on some models)
The sheff bottom flips up so you can store
taller items in the door shelf below. When in
the down position, the shelf is strong enough
to hold up to 10 pounds.
10
WITH QUESTIONS OR COYYENTS