Removing The Door Trim; Adjusting The Refrigerator Shelves - Roper RS20AKXDN00 Use & Care Manual

Removing the door trim
(dispenser area)
(on some models)
Remove the trim above the dispenser area
for easier cleaning.
To remove trim:
1.
Remove all items from the shelf.
2. Pull straight up at each end of the trim.
To replace trim:
1.
Line up each end of the trim above the
trim pocket opening in the door liner wall.
2. Push the trim straight down until it stops.
3. Replace items on the shelf.
Adjusting the refrigerator shelves
Adjust the shelves to match the way you use
your refrigerator. Glass shelves are strong
enough to hold bottles, milk,
and
other
heavy food items.
To remove the shelves:
1.
Remove items from the shelf.
2. Tilt shelf up at front.
3. Lift shelf up at back.
4. Pull shelf straight out.
To replace the shelves:
1.
Guide the rear shelf hooks into the slots
in the shelf supports on the back liner
wall.
2. Tilt front of shelf up until hooks drop
into slots.
3. Lower front of shelf to
a
level position.
Glass shelves are heavy. Be careful.
10
WITH OUESTIONS OR COYNLNTS