Removing The Crispers And Crisper Cover; Adjusting The Crisper Cover Track - Roper RT16DKXDN03 Use And Care Manual

Removing the crispers and crisper cover
To remove the crispers:
1.
Slide crisper straight out to the stop.
2. Lift the front.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1.
Push up the cover insert from the bottom,
then slide out with both hands.
2. Lift front of cover frame.
3. Lift cover frame up and out.
To replace the cover:
1.
2.
Fit back of cover frame into notch sup-
ports on back wall of refrigerator, then
lower the front into place.
Slide back of cover insert into place, then
lower the front.
Pull out to the
stop, lift the
front and pull
again.
Remove the
cover insert.
Lift the cover
front, then the
back.
NOTE: Handle
glass insert
with care. It
could be heavy.
Y
Adjusting the crisper cover track
(on some models)
For your convenience, one crisper may be
larger than the other, and your crisper cover
may have an adjustable center track so you
can switch positions of the crispers. This
allows you to store celery and other longer
items in a crisper. You can adjust the cover
center track with the cover in the refrigerator
by removing the crispers and the cover insert.
To remove the center track:
1.
Push up the cover insert from the bottom,
then slide out with both hands.
2. Gently pull up on front end of track.
3. Pull rear end of track out of opening
in cover.
To replace the center track:
1.
Insert rear end of track (with hole) into
opening in cover.
2. Lower front end of track into slot.
3. Make sure rear end of track has snapped
into place on underside of cover.
14
Step 1