Changing The Control Settings; Removing The Drop-In; Door Trim Pieces - Roper RT16VK Use And Care Manual

Changing the control settings
If you need to adjust temperatures in the
l
Adjust the Refrigerator Control first.
refrigerator or freezer, use the settings listed
l
Wait at least 24 hours between adjust-
in the chart below as a guide. If you have
ments.
questions, call our Consumer Assistance
Center number. (See page 23.)
l
Then adjust the Freezer Control if needed.
RECOMMENDED
CONDITION:
REASON:
CONTROL SElTlNGS:
Refrigerator
Freezer
Refrigerator
l
Door opened often
section
l
Large amount of food added
too warm
l
Room temperature too warm bi z fJ
Freezer
l
Door opened often
section
l
Large amount of food added
too warm
l
Very cold room temperature
(can't cycle often enough)
Ei ,, ;I
Refrigerator
l
Controls not set correctly for
section
your conditions
too cold
li ,, ;I
Ice not
l
Heavy ice usage
made fast
l
Very cold room temperature
enough
(can't cycle often enough)
li ,, g
Both sections
l
Door opened often
too warm
l
Large amount of food added
l
Very warm or very cold room
temperatures
Removing the drop-in door trim pieces
To remove the trim piece:
1.
Remove all items from the shelf.
2. Pull straight up on the trim piece at each
end.
To replace the trim piece:
J
1.
Locate each end of the trim piece above
the trim pocket opening.
2. Push the trim piece straight down until it
stops.
3. Replace items on the shelf.
)
9