Changing The Control Settings; Removing The Door Shelf Fronts - Roper RS20AKXDN00 Use & Care Manual

Changing the control settings
If you need to adjust temperatures in
refrigerator or freezer, use the settings listed
in the chart below as a guide. If you have
questions, call our toll-free number, 1 -BOO-
44ROPER.
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between
adjustments.
l
Then adjust the Freezer Control if needed.
CONDITION:
Refrigerator
section
too warm
Freezer
section
too warm
Refrigerator
section
too cold
Ice not
made fast
enough
Both
sections
too warm
REASON:
l
Door opened often
l
Large amount of food added
l
Room temperature too warm
l
Door opened often
l
Large amount of food added
l
Very cold room temperature
(can't cycle often enough)
l
Controls not set correctly
for your conditions
l
Heavy ice usage
l
Very cold room temperature
(can't cycle often enough)
l
Door opened often
l
Large amount of food added
l
Very warm or very cold room
temperatures
RECOMMENDED
CONTROL SElTlNGS:
Refrigerator 4
Freezer
A
Refrigerator 3
Freezer
C
Refrigerator 2
Freezer B
Refrigerator 3
Freezer
C
Refrigerator 4
Freezer B
Removing the door shelf fronts
(on some models)
Remove the door shelf fronts for easier
cleaning.
To remove shelf fronts:
1.
Remove all items from the shelf.
2. Pull out on the inside tab at each end of
the shelf front.
3. Pull sheff front straight out.
To replace shelf fronts:
1.
Line up each end of the shelf front with
the button on the door liner wall.
2. Push shelf front straight back until it
snaps securely into place.
3. Replace items on the shelf.
9