Removing The Water Valves - Whirlpool JOB AID GC1SHAXM Installation And Operation Manual

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug refrigerator or disconnect power.
2. Remove the six screws from the unit com-
partment cover and remove the cover.
Unit Compartment Cover Screws (3 of 6)

REMOVING THE WATER VALVES

3. Disconnect the two water outlet lines from
the water valves.
4. Disconnect the four electrical connectors
from the valve terminals. NOTE: One
valve has 3/16ʺ terminals and the other
has 1/4ʺ terminals so that they cannot be
reversed.
5. Remove the two 9/32ʺ hex-head screws
from the valve bracket.
6. Disconnect the two water inlet lines from
the water valves and remove the valve
assembly from the unit.
Bracket
Screws
Blu & Wht Connectors
Water Outlet Lines
4-9
Brn & Blk Connectors
Water Inlet Lines