Removing The Condenser Fan Motor - Whirlpool JOB AID GC1SHAXM Installation And Operation Manual

REMOVING THE CONDENSER FAN MOTOR

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
1. Unplug refrigerator or disconnect power.
2. Remove the six screws from the unit com-
partment cover and remove the cover.
Unit Compartment Cover Screws (3 of 6)
3. Using a 9/16ʺ socket, remove the hex-nut
and fan blade from the condenser fan mo-
tor.
Fan Blade
9/16ʺ Socket
4. Remove the three Torx (#15) screws from
the condenser fan motor and remove the
motor from the bracket.
5. Disconnect the wire connector from the
fan motor.
4-10
Fan Motor Torx
Screws (2 of 3)
Fan Motor Connector