Removing The Evaporator Tray - Whirlpool JOB AID GC1SHAXM Installation And Operation Manual

REMOVING THE EVAPORATOR TRAY

WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
NOTE: The evaporator tray is not customer
removable.
1. Unplug refrigerator or disconnect power.
2. Remove the two screws from the bottom
grille and remove the grille.
Bottom Grille Screws
3. Remove the two 9/32ʺ (7 mm) hex-head
screws from the filter bracket, and push
the bracket assembly to the right as far as
it will go.
4. Pull the evaporator tray out from below
the unit and remove it.
4-7
Filter Bracket Screws
Evaporator
Tray