Installation Preparation; Installation Steps - Pentair PCFE40P12 Owner's Manual

4.2 Installation Preparation

Typical Tools and Materials Required
• Pipe Cutter
• Tubing Cutter
• File
• Pliers
• Tape Measure
• Soldering Tools
• Lead Free Solder
• Bucket
• Towel
• Plumbers Tape
• Adjustable Wrench
• Tube 100% Silicone Grease

4.3 Installation Steps

The Carbon filter has three openings: the inlet, the outlet and drain.
Open the water supply tap and flush the water pipe network to ensure water pipes are clean
and free of debris. then, turn off the main water supply incoming valve.
Determine the installation position of the carbon filter and lay the connecting pipes to match
the various diameters of the three openings of the carbon filter.
.75" (19.05 mm)
_________________________________________________________________________________________________________________________________________
4.00" (101.60 mm)
2.00" (50.80 mm)
Outlet
1" BSP
Copyright© Pentair
2.00" (50.80 mm)
Inlet
1" BSP
Drain
1/2"
11