Advertisement
P/N 3124450_A
INSTALLING ACRYLIC PARTITIONS
Loosely fasten the Acrylic Partition — 3 and Top
Right Retainer — 4 to the Left Top Retainer using
Screws — 5, Washers — 6, and Locking Nut — 7 as
shown in Figure 3, Detail A.
Fasten the Top Right Retainer — 4 to the interior top
panel of right case using Screws — 2.
Position the Bottom Left Retainer — 8 and Bottom
Right Retainer — 9 at the bottom of the partition
and around both end frames as shown in Figure 5.
Fasten with Screws — 5, Washers — 6, and Locking
Nut — 7 as shown in Figure 5.
Position the Closeoff Retainer — 12 at the bottom
of the partition as shown. Fasten with Screws — 5,
Washers — 6, and Locking Nut — 7.
Return to the joining instruction for fastener
tightening sequence, joint molding installation and
other steps necessary to complete lineup.
Partition
Installed
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Interior Top
Panel of Right
Interior Top
Case
Panel of Left
Case
DETAIL A
Left Case
Partition
DETAIL A
See
Detail A
See
Detail A
Right Case
Partition
Freedom Reach-in
11
Advertisement
