Location Of Controls; Before Starting A Fire - FireplaceXtrordinair 36-Elite Owner's Manual

10

Location of Controls

Before Starting a Fire

• Make sure the by-pass is open while starting a fire (leave it open for the first 15 minutes).
• Make sure the air control is on high. If additional air is needed, open the doors 1/4" during the first
five minutes of start-up.
• If the smoke does not pass up the chimney, ball up one sheet of newspaper, place it in the center of
the firebox and light it. This should start the chimney drafting (this eliminates "cold air blockage").
• Never use gasoline, gasoline-type lantern fuel, kerosene, charcoal lighter fluid, or similar liquids to
start or "freshen up" a fire in this fireplace. Keep all such liquids well away from the fireplace while it
is in use.
• If using a firestarter, use only products specifically designed for
fireplaces - follow the manufacturer's instructions carefully.
• Use plenty of kindling to ensure the fireplace reaches a proper
temperature. Once the kindling is burning rapidly, place a few
larger pieces of wood onto the fire.
©Travis Industries
Operation
Make sure the By-Pass
is all the way out.
10/2/2019 - 1516
By-Pass
When hot, use
Control
gloves to adjust
the controls
Air
Control
Summer Fan
Switch (optional)
Blower Speed
Control
36 Elite Owner's