Whirlpool RB16 PXB Use And Care Manual page 30

If a cleaning cycle other than 3 hours is
desired,
use
the Hour and Minute pads
to set the desired cleaning time. Push the
"up" (A) or Vown" (V) pad(s) until a time
between 2-4 hours shows on the display.
l
Use
2 hours for light soil.
l
Use 34 hours
for moderate to heavy soil.
Push
the Start/Enter pad. TIMED and
HEAT will light up on the display to
indicate that the oven is programmed for
the Self-Cleaning cycle.
NOTE: The display will show 'door" and a
tone will sound once a minute for 5
minutes if the door is not latched.
4. To delay the start using Stop Time:
Push
the Clean pad.
Push
the Stop Time
pad. STOP, TIME, CLEAN,
and
"cln" will
light up.
Use
the Hour and Minute pads to
set the desired stop time.
Push
the "up"
(A) or "down" (V) pad(s) until the correct
time shows on the display. The oven will
automatically compute the delay start time
by subtracting the set cleaning time from
the set stop time.
Push
the Start/Enter pad. DELAY,
CLEAN, and the time of day will light up
on the display to indicate that the oven is
programmed to start the Seff-Cleaning
cycle at a later time. Skip to Step 6.
5. To delay the start using Start Time:
Push
the Clean pad.
Push
the Delay Start
Time pad. START, TIME, CLEAN, and
"cln" will light up.
Use
the Hour and Minute
pads to set the desired start time.
Push
the "up" (A) or "down" (r) pad(s) until the
correct time shows on the display.
Push
the Start/Enter pad. DELAY,
CLEAN, and the time of day will light up
on the display to indicate that the oven is
programmed to start the Self-Cleaning
cycle at a later time. After the start time
has been set, the large display will go
back to showing the current time of day.
DELAY
and
CLEAN will stay on. When the
start time is reached, DELAY will go off,
TIMED, CLEAN, and CLEAN TIME will
light up, and the oven will start to clean.
30