Whirlpool RB16 PXB Use And Care Manual page 23

Method 2 - Using Start Time
and Stop Time:
1. Position the oven rack(s) properly and
put food in the oven.
2. Push the Bake pad to enter the Bake
mode. Use the Temp pad(s) to set the
desired temperature. Push A to raise the
temperature or V to lower the tempera-
ture in 5°F increments. Use these pads
until the desired temperature shows on
the small display.
After you have set the desired tem-
perature, the display will show the set
temperature and the time of day. BAKE
will light up.
3. Push the Delay Start Time pad. The time
of day with the colon flashing will show
on the display and START TIME will
light up.
4. Use the Hour and Minute pads to set the
desired start time. Push the "up" (A) or
"down" (V) pad(s) until the correct time
shows on the display.
This example shows a desired start time
of 2 o'clock.
5. Push the Stop Time pad. The time of day
with the colon flashing will show on the
display and STOP TIME will light up.
continued on next page
23