Whirlpool RB16 PXB Use And Care Manual page 20

2. Push
the Bake pad to enter the Bake mode. Use
the Temp pad(s) to set the desired temperature.
Push
A to raise the temperature or V to lower
the temperature in 5°F increments. Use these
pads until the desired temperature shows on the
small display.
After you have set the desired temperature,
the display will show the set temperature and the
time of day. BAKE will light up.
3. Push
the Stop Time pad. The time of day with
the colon flashing and STOP TIME will show
on the display.
4. Use
the Hour and Minute pads to set the desired
stop time.
Push
the "up" (A) or "down" (V)
pad(s) until the correct time shows on the
display.
This example shows a desired stop time of
2 o'clock. This provides a 2-hour cook time
(the difference between the time of day and
the stop time).
5. Push
the Start/Enter pad. "Lo"", HEAT,
TIMED, and BAKE will light up on the display
to indicate that the oven is heating.
NOTE:
The display will show "door" and a tone
will sound once a minute for 5 minutes if the
door is latched when you try to bake/roast.
6.
You can change the temperature or time
settings any time after pushing the Start/Enter
pad by repeating any of Steps 2 through 4.
The display
will count down the baking/roasting
time in minutes.
7
, . When the baking/roasting time is completed,
the oven will turn off automatically, beep four
times, and "End" will show on the display. You
will also hear four 1 -second tones every minute
until you push the Off/Cancel pad.
NOTE:
To disable reminder tones, push and
hold the Cook Time pad for 4 seconds. To
reactivate tones, repeat this procedure.
To cancel the MEALTIMER" control setting:
l
Push
the Off/Cancel pad to return the display
to the time of day.
20