4. Adhere the tape on the battery connector[2].
5. Install the:
a.
SD card
b.
SIM
6. Follow the procedure in
Heat sink
Removing the heat sink assembly
Steps
1. Follow the procedure in
2. Remove the:
a.
SD card
b.
SIM
c.
display panel
d.
battery
3. To remove the heat-sink shield
a. Lift the left heat-sink shield [1] and right heat-sink shield [2] away from the heat-sink.
b. Unroute the WLAN card cables from the routing guides [2]..
Open the latch and disconnect the heat-sink fan cable from the connector on the system board [3]
32
Disassembly and reassembly
After working inside your
Before working inside your
tablet.
tablet.