Display Assembly - Dell Latitude 7200 2-in-1 Service Manual

Display Assembly

Display panel pry points
For the Latitude, on-site technicians must take care to remove the display panel carefully. The image below shows the proper
location for prying the display panel from the system after removing the screws securing the display panel.
NOTE:
There are two different configurations of the Latitude 7210 2-in-1:
● Non-security config with non-captive screws.
● Security config with captive screws.
1. Remove the six screws (non-security config) / six captive screws (security config) securing the display assembly of Latitude
7210 2-in-1 to the system chassis.
2. Using a plastic scribe, push the two release holes next to the hinges to loosen the display assembly from the display back
cover.
Disassembly and reassembly 9