NOTE:
Ensure to peel off the adhesive tape that secures the front camera to the rear camera. The front camera
cable is glued to the rear camera, ensure to gently peel off, to remove the screw that secures the rear camera to the
system board.
d. Remove the M1.6 x 3 screws securing the front camera module to the system chassis.
e. Peel off and lift the front camera module from the tablet.
Installing the front facing camera
Steps
1. Insert the camera module into the slot on the tablet.
2. Replace the M1.6 x 3 screws to secure the front camera module.
42
Disassembly and reassembly