Dell Latitude 7200 2-in-1 Service Manual page 13

Figure 3. Remove display cable
Removing the display assembly
Steps
1. Follow the procedure described in Before working on your tablet.
2. Open the kickstand by holding the tablet vertically and pressing it down. Place the tablet with the display facing down.
NOTE: You can also open the kickstand from the speaker recess area.
NOTE: SIM card slot is available only on tablets shipping with WWAN module.
3. Place the tablet on a flat surface and lift the stand to reveal the base of the tablet.
NOTE: Ensure to open the kickstand to 145 degrees.
Disassembly and reassembly 13