Secure Boot - Dell Latitude 7200 2-in-1 Service Manual

Table 4. Security (continued)
Option
UEFI Capsule Firmware
Updates
TPM 2.0 Security
Absolute®
Admin Setup Lockout
Master Password
Lockout
SMM Security
Mitigation

Secure boot

Table 5. Secure Boot
Option
Secure Boot Enable
Secure Boot Mode
80 System setup
Description
● Allow Wireless Switch Changes
By default, this option is disabled.
Allows you to update the system BIOS through UEFI capsule update packages.
● Enable UEFI Capsule Firmware Updates
By default, this option is enabled.
Allows you to enable or disable the Trusted Platform Module (TPM) during POST.
The options are:
● TPM On—This option is enabled by default.
● Clear
● PPI Bypass for Enable Commands
● PPI Bypass for Disbale Commands
● PPI Bypass for Clear Command
● Attestation Enable—This option is enabled by default.
● Key Storage Enable—This option is enabled by default.
● SHA-256—This option is enabled by default.
This field lets you Enable, Disable, or Permanently Disable the BIOS module interface of the
optional Absolute Persistence Module service from Absolute® Software.
Allows you to prevent users from entering Setup when an administrator password is set.
● Enable Admin Setup Lockout
By default, this option is disabled.
Allows you to disable master password support.
● Enable Master Password Lockout
By default, this option is disabled.
NOTE: Hard Disk password should be cleared before the settings can be changed.
Allows you to enable or disable additional UEFI SMM Security Mitigation protection.
● SMM Security Mitigation
By default, this option is enabled.
Description
Allows you to enable or disable the Secure Boot Feature.
● Secure Boot Enable—By default, this option is disabled.
Changes to the Secure Boot operation mode modifies the
behavior of Secure Boot to allow evaluation of UEFI driver
signatures.
This options are:
● Deployed Mode—By default, this option is enabled.
● Audit Mode