Chapter 2: Disassembly And Reassembly; Disassembly And Reassembly; Remove Sd Memory Card And Sim Card Tray; Kickstand - Dell Latitude 7200 2-in-1 Service Manual

Hide thumbs Also See for Latitude 7200 2-in-1:
Table of Contents

Advertisement

Topics:

Disassembly and reassembly

Disassembly and reassembly

Remove SD memory card and SIM card tray

Steps
1. Follow the procedure in Before working inside your tablet.
NOTE:
disconnect the power and drain flea power before preforming the steps
2. Lay the tablet on a plane and flat surface, with the kickstand facing upward.
3. Press the SD memory card to release it.
NOTE:
Ensure to turn off or disconnect power, to drain flea power before removing or installing the memory card
and/or SIM card.
4. Slide the SD memory card out from the system.
5. To remove the SIM card tray from the system, insert a pin into the release hole to release the SIM card.
6. Remove the SIM card tray from the system.

Kickstand

Latitude 7210 2-in-1 has the Kickstand power on feature. When the kickstand is deployed, the tablet will power on. If
the tablet is powered on with the kickstand deployed, press and hold the power button to turn off the tablet, and
then begin the tablet disassembly. There is no need to close the kickstand, proceed to remove the screws securing
the display assembly.
8
Disassembly and reassembly
Disassembly and reassembly
2

Advertisement

Table of Contents
loading

Table of Contents