To Change The Base Plate - Janome 1110DX PRO Service Manual

To remove:
1. Remove the setscrew A, B, C, D and two hinge screws E, and remove the rubber cushions.
2. Remove the base plate.
To attach:
3. Attach the base plate, and tighten the setscrew A, B, C and D.
4. Attach the rubber cushions, washers, and tighten the hinge screws.
Use white washer
in this position
Rubber cushion
Setscrew E

TO CHANGE THE BASE PLATE

Setscrew D
Setscrew C
Washer
Setscrew A
Base plate
Setscrew B
7