To Change The Face Plate Unit - Janome 1110DX PRO Service Manual

TO CHANGE THE FACE PLATE UNIT

To remove:
1. Loosen the setscrew A and remove the face plate unit.
To attach:
2. Fit the U-groove in the face plate between the setscrew and set plate, put the rib in the tension cover unit,
top cover and rear cover, and tighten the setscrew.
Setscrew A
Top cover unit
Rear cover
Set plate
Setscrew A
U-groove
Face plate unit
Tension cover unit
1
Rib
Rib