Ariens GRAVELY Pro-Turn 400 Series Dealer/Owner/Operator Manual page 20

SEAT ADJUSTMENTS
Height/Pressure Adjustment Knob
WARNING: Make all seat
adjustments with unit stationary,
parking brake engaged and
engine shut off.
Unit is equipped with an adjustable air-
cushion seat which allows adjusting seat
height and operator comfort.
(Figure 7)
To adjust seat height:
1. While seated move ignition key to the
On position.
2. Push seat height-pressure adjustment
knob (item 1) inward to inflate air
cushion and increase seat height.
3. Pull seat height/pressure adjustment
knob outward to release air from cushion
and lower seat height.
2
1
1. Height/Pressure Adjustment Knob
2. Seat Adjustment Lever
Figure 7
Arm Rest Angle
(Figure 8)
WARNING: Make all seat
adjustments with unit stationary,
parking brake engaged and
engine shut off.
To adjust seat forward or backward:
1. While seated, pull seat adjustment lever
(item 2) outward and slide seat into
desired position.
2. Release lever and slide seat slightly
forward or back to lock seat into
position. Ensure that seat is locked into
position before moving unit.
To tilt seat forward see Service Position on
page 26.
Arm Rest Height
(Figure 8)
The arm rests can be adjusted for height to
accomodate operator preference.
• Mount the arm rests in the upper
mounting holes for a lower arm rest
height.
• Mount the arm rests in the lower
mounting holes for a higher arm rest
height.
The arm rests can also be adjusted for arm
angle.
• Turn the height adjustment knob
(item 1) counter-clockwise to raise the
front of the armrest.
• Turn the height adjustment knob
clockwise to lower the front of the
armrest.
EN - 20