Avaya TASKE Contact 8.8 Installing Manual page 19

4.5. Administer Security Database
All devices that are monitored and controlled by TASKE Contact need to be configured in the
Avaya AES security database.
1. From the CTI OAM Home menu, select Administration
Devices, and add each device by entering the device extension and clicking on Add Device.
A sample listing of the configured devices used for compliance testing is displayed in
Figure 19. Note that the total number of devices may vary, as this depends on the number
of extensions to be monitored.
SVS; Reviewed:
SPOC 6/18/2008
Figure 19: Devices
Solution & Interoperability Test Lab Application Notes
©2008 Avaya Inc. All Rights Reserved.
Security Database
AES41-Taske
19 of 39