The Battery - Husqvarna X-COM R Workshop Manual

4. Right earmuff: Connect the microphone connector
(D). Put the cable as shown in the illustration.
D
5. Left earmuff: Connect the microphone connector (E).
Put the cable as shown in the illustration.
6. Assemble the right earmuff. Refer to
the right earmuff on page 13 .
7. Assemble the left earmuff. Refer to
left earmuff on page 14 .
893 - 001 -
E
To assemble
To assemble the

7.10 The battery

7.10.1 To replace the battery
1. Disassemble the left earmuff. Refer to
disassemble the left earmuff on page 12 .
2. Disconnect the battery connector.
3. Remove the 4 screws (A) and carefully remove the
circuit board (B).
To
A
B
Repair instructions - 19