GEM 1434 mPos Installation, Operating And Maintenance Instructions page 17

Contents
1 Notes for your safety
1.1 General information
1.2 Safety notes
1.3 Correct use
1.4 Information on use in damp
conditions
1.4.1 Converting to protection
class IP 67
1.5 Installation position
1.6 Tools required for installation and
assembly
1.7 Service and maintenance
2 Manufacturer's information
2.1 Delivery
2.2 Function
3 Mechanical mounting
3.1 Assembling the travel sensor
3.2 Mounting the positioner
3.3 Mounting the external travel
sensor (only for version with
remote mounting)
3.4 Mounting the positioner using a
mounting bracket
4 Pneumatic connections
5 Electrical connections
6 Initialisation and
commissioning
6.1 Electrical and pneumatic
connection
6.2 Automatic initialisation
6.3 Commissioning
7 Display elements
8 Error messages
9 Disposal
10 Returns
11 Information
12 Dimensions
13 Technical data
14 Order data
15 EU Declaration of Conformity
1 Notes for your safety
Please read the following notes carefully and
17
observe them!
17
18
1.1 General information
18
Important requirements to ensure that our
GEMÜ 1434 Pos works correctly:
19
• Correct transport and storage
• Installation and commissioning by trained
19
personnel
20
• Operation according to these installation,
operating and maintenance instructions
20
• Recommended maintenance
20
All rights including copyright
20
and industrial property rights are
20
expressly reserved.
20
21
The GEMÜ 1434 Pos must be used
21
in accordance with these directions.
22
All information in these installation,
operating and maintenance instructions
regarding operation, servicing and
maintenance must be observed and
23
applied. If the information is not
observed, the operator's guarantee
23
rights and the manufacturer's legal
24
liability cease.
24
The manufacturer shall assume no
responsibility for the GEMÜ 1434 Pos
24
if this safety information is not observed.
Therefore, you must observe:
25
• the contents of these installation, operating
25
and maintenance instructions
25
• the relevant safety regulations for the
26
installation and operation of electrical
27
systems
27
• that this device must not be used in
27
potentially explosive areas.
27
The regulations, standards and guidelines
28
named in these installation, operating and
29
maintenance instructions are only applicable
30
in Germany. If the GEMÜ 1434 Pos is
31
used in other countries, the local applicable
regulations must be observed. When
dealing with harmonised European norms,
standards and guidelines, these apply within
the Single European Market. The operator
must also adhere to national rules and
guidelines, if applicable.
The descriptions and instructions in these
17 / 32
1434 µPos