Table of Contents
Advertisement
Wall-/Pipe Mounted Universal Process Indicator
C160
X
X
Display and Alarm
The C160's two built-in 5A relays can be used to annunciate high
or low process alarms. Active alarms are indicated by flashing
LEDs to the right of the main display.
Isolated Retransmission
The C160 has, as standard, a 4 to 20mA output for
retransmission of the process variable to a chart recorder or data
logger.
Custom Linearization
As standard the C160 has a 20-breakpoint linearizer suitable for
volume calculation. (Factory setup using PC configurator).
Y
Flow Totalization, 6 digits
A standard feature in the C160 is flow totalization. This totals any
4 to 20mA flow signal. With the built-in transmitter power supply
and root extraction this makes the C160 ideal for use with
Differential Pressure devices such as the WEDGEMASTER. It
can also be configured for simple batch control by use of preset
Y
and predetermined totals.
RS485/Modbus
Fitted with an optional RS485 serial communication board the
C160 can communicate with PLCs and SCADA systems using
the Modbus protocol.
DS/C160–EN Rev. I
3
Advertisement
Table of Contents
