Removing 3.5-Inch Hard Disk Drive - NEC Bull NovaScale R620 User Manual

Removing 3.5-inch Hard Disk Drive

Follow the procedure below to remove the hard disk.
IMPORTANT:
Make sure to read "ANTI-STATIC MEASURES" and "PREPARING YOUR SYSTEM FOR UPGRADE" before
starting installing or removing options.
1.
Shutdown Windows Server 2003.
The system turns off automatically.
2.
Disconnect all the power cords from the power outlet.
3.
Unlock the front bezel with the security key and detach it.
4.
Push the lever of the hard disk to unlock the handle.
5.
Hold the handle and hard disk to pull them off.
6.
Install the dummy tray in an empty tray according to procedures described in
"Installation".
Make sure to install the dummy slot in the empty slot to improve the cooling
effect within the device.
NovaScale R620 User Guide
8-8