Global Configuration - Avaya WLAN 8100 Configuration

Configuring an Enterprise Wireless LAN using CLI
9. Use the following command input to elevate the interface to Mobility Controller
10. Create and join the domain using the following command input:

Global configuration

About this task
Use the following procedure to configure and associate network profiles.
Procedure
1. Create the mobility VLANs (MV) using the following command input:
2. Configure the RADIUS server using the following command input:
3. Configure the employee network profile using the following command input:
8 Avaya WLAN 8100 Configuration
Domain (MCD) capable:
WC8180(config-wireless)#controller mdc-capable
% Domain password should be between 10-15 characters long.
% Password must contain a minimum of 2 upper, 2 lowercase letters
% 2 numbers and 2 special characters like !@#$%^&*()
Enter domain password: **********
Verify Domain password: **********
WC8180(config-wireless)#
WC8180#wireless controller join-domain domain-name Avaya mdc-address
30.1.1.51
Enter Domain Secret: *****
Use 'show wireless controller domain-membership' to see join status.
WC8180(config-wireless)#domain mobility-vlan MV-EMP
WC8180(config-wireless)#domain mobility-vlan MV-VOICE
WC8180(config-wireless)#domain mobility-vlan MV-GUEST
WC8180(config-wireless)#domain mobility-vlan MV-ELECTRICAL
WC8180(config-security)#radius profile rad-srvr-profile type auth
WC8180(config-security)#radius server 10.1.1.104 rad-srvr-profile secret
Enter server secret: ********
Verify server secret: ********
WC8180(config-security)#radius server 10.1.1.104 rad-srvr-profile
priority 1
WC8180(config-security)#radius server 10.1.1.105 rad-srvr-profile secret
Enter server secret: ********
verify server secret: ********
WC8180(config-security)#radius server 10.1.1.105 rad-srvr-profile
priority 2
WC8180(config-wireless)#network-profile 2
Creating network-profile (id = 2) ...
WC8180(config-network-profile)#profile-name NP-staff
Comments? infodev@avaya.com
August 2011