Global Configuration - Avaya WLAN 8100 Configuration

Global configuration

About this task
Use the following procedure to configure and associate network profiles in Wireless LAN
Management (WMS).
Procedure
1. Navigate to Mobility Domains > <Domain Name> > Mobility Profiles.
2. Click Add to add a new Mobility VLAN. Create the MV-EMP, MV-VOICE, and MV-
3. Navigate to Mobility Domains > <Domain Name> > RADIUS Profiles and configure
4. Navigate to Mobility Domains > <Domain Name> > Policy > Network Profiles to
5. Navigate to Mobility Domains > <Domain Name> > Policy > Network Profiles to
Avaya WLAN 8100 Configuration
GUEST Mobility VLANs.
the RADIUS server
a. On the RADIUS Profile tab, click Add. Enter the name of the RADIUS profile
(rad-srvr-profile), and select auth as the type. Click Add to create the profile.
b. AUTHOR: Please advise on further steps to configure the RADIUS server. I was
unable to find where to set profile priority/secret using EDM.
c. Select the RADIUS profile in the Radius Profiles pane. The Radius Profile
Server window appears below.
d. Click Add to add a new RADIUS server to the RADIUS profile.
e. Enter the RADIUS server IP address, password, UDP port and priority.
f. Click Add to save your changes.
g. Repeat steps a. through f. for each additional RADIUS server you want to
add.
configure the employee network profile:
a. On the Network Profile tab, Click Add to add a new profile.
b. Enter the profile name, Default Client VLAN (MV-EMP), and User Validation.
c. Enter the SSID for the network profile (for example, Employee).
d. In the Authentication Profile field, select the RADIUS profile
e. Click Add to create the network profile.
configure the voice network profile:
a. On the Network Profile tab, Click Add to add a new profile.
b. Enter the profile name, Default Client VLAN (MV-VOICE), and User
Validation.
Configuring an Enterprise Wireless LAN using WMS
August 2011 25