Configuring The Amdc - Avaya WLAN 8100 Configuration

Configuring the AMDC

About this task
Use the following procedure to configure the Active Mobility Domain Controller (AMDC) using
Enterprise Data Manager (EDM).
Procedure
1. Log on to Enterprise Device Manager (EDM).
2. Configure the VLAN by navigating to Configuration > VLAN > VLANs. Click Insert
3. Associate ports to the configured VLAN.
4. Configure MultiLink Trunking (MLT) by navigating to Configuration > VLAN > MLT/
5. To create the VLAN IP interfaces navigate to Configuration > VLAN >VLANs.
6. Associate the management VLAN, navigate to VLAN > Settings.
7. Navigate to Configuration > VLAN > VLANs. The VLAN screen appears on the
8. In the Routing column, select true from the drop down menu to enable routing on
9. Navigate to Configuration > Wireless > System and configure the wireless system
10. Navigate to Configuration > Wireless > Controller. Select MdcCapable, and set the
11. Enter the DomainName and Secret to create and join the domain.
Avaya WLAN 8100 Configuration
to add a new VLAN.
LACP.
a. Select the MultiLink Trunk you want to enable from the MultiLink Trunk tab.
b. Select the Enable field and change the value to true.
a. Click the IP button on the Basic tab. The IP tab appears.
b. Click Insert and enter the new IP and NetMask.
c. Click Insert to save your changes.
right.
each VLAN.
interface. Values to be set are WirelessEnabled (checkbox),
SystemInetAddressType, SystemInetAddress, and TcpUdpBasePort.
Domain Password to elevate the interface to Mobility Controller Domain (MCD)
capable.
Configuring an Enterprise Wireless LAN using EDM
August 2011 17