System Controller - Xilinx KCU116 User Manual

Table 3-28 describes the SYSMON header J93 pin functions.
Table 3‐28: SYSMON Header J93 Pinout
Schematic Net Name
SYSMON_DXP, SYSMON_DXN
SYSMON_AGND
SYSMON_VREF
SYSMON_VCC
SYSMON_VN, SYSMON_VP
VCCINT_VIN_R_P/N
For more details on SYSMON, see the UltraScale Architecture System Monitor User Guide
(UG580) [Ref 20].

System Controller

[Figure 2-1, callout 36]
The KCU116 board includes an onboard Zynq® SoC multiprocessor XC7Z010 (U161) with
system controller firmware. A host PC resident graphical user interface for the system
controller (SCUI) is provided on the KCU116 website. The SCUI can be used to query and
control select programmable features such as clocks, FMC functionality, and power systems.
The KCU116 website also includes a KCU116 System Controller Tutorial (XTP465)
and KCU116 Software Install and Board Setup Tutorial (XTP464)
steps are:
1. Ensure the Silicon Labs VCP USB-UART drivers are installed on the host PC. See Silicon
Labs CP210x USB-to-UART Installation Guide (UG1033)
2. Download the SCUI host PC application.
3. Connect the micro-B USB cable to the KCU116 board USB-UART connector (J164).
4. Power-cycle the KCU116 board.
5. Launch the SCUI.
KCU116 Board User Guide
UG1239 (v1.2) September 28, 2018
J93 Pin Number
NC
www.xilinx.com
Chapter 3: Board Component Descriptions
1,3 No connect
2,4 Access to thermal diode
5,6 Analog ground reference
7 REF3012 U64 1.25V
8 Filtered V
CCAUX
FPGA dedicated analog input channel
9,10
for SYSMON
MAX15301 U47 V
11,12
R36 IR-drop taps
[Ref
[Ref 15].
Description
1.80V
series 0.002Ω
CCINT
[Ref 16]
17]. A summary of the
79
Send Feedback