Hdmi Video Output - Xilinx KCU116 User Manual

Table 3-15 lists the USB connector J164 pin assignments.
Table 3‐15: USB Connector J164 Pin Assignments
USB Connector (J164)
Pin
1
2
3
5
For more technical information on the CP2105GM and the VCP drivers, see the Silicon Labs
website [Ref 27].
Xilinx UART IP is expected to be implemented in the FPGA logic using IP. See the AXI UART
Lite LogiCORE IP Product Guide (PG142)

HDMI Video Output

[Figure 2-1, callout 19]
The KCU116 evaluation board provides HDMI™ video output using an Analog Devices
ADV7511KSTZ-P HDMI transmitter at U5. The HDMI transmitter U5 is connected to XCKU5P
FPGA bank 65 and its output is provided on a Molex 47151-0011 HDMI receptacle at P2. The
ADV7511 supports 1080P 60 Hz, YCbCr 4:2:2 encoding via 18-bit input data mapping.
The KCU116 evaluation board supports these HDMI device interfaces:
• 18 data lines
• Independent VSYNC, HSYNC
• Single-ended input CLK
• Interrupt out pin to FPGA
2
• I C
• Sony/Philips digital interface format (SPDIF) audio
KCU116 Board User Guide
UG1239 (v1.2) September 28, 2018
Schematic Net Name
Name
VBUS USB_VBUS
D_P USB_UART_DATA_P
D_N USB_UART_DATA_N
GND USB_VBUS_GND
GND
[Ref 11]
www.xilinx.com
Chapter 3: Board Component Descriptions
CP2105GM (U166)
Pin
3
4
2, 25
for more information.
Send Feedback
Name
D_P
D_N
GND
51