Removing The Power Button; Installing The Power Button - Dell Vostro 3888 Service Manual

Power button

Removing the power button

Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
3. Remove the front bezel.
About this task
The following images indicate the location of the power button switch and provides a visual representation of the removal procedure.
Steps
1. Disconnect the power button cable from the connector on the system board.
2. Press the release tabs and slide the power button out from the front-side chassis of the computer.
3. Pull the power button out from the computer.

Installing the power button

Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the power button switch and provides a visual representation of the installation procedure.
46 Disassembly and reassembly