Solid-State Drive - Dell Vostro 3888 Service Manual

Steps
1. Slide and insert the 3.5 in. hard-drive assembly into the hard drive cage.
2. Align the hard-drive assembly with the tabs on the chassis.
3. Replace the four 6-32 screws to fix the 3.5 hard drive in place.
4. Route the power cable and data cable through the routing guides on the hard-drive assembly and connect the cables to the hard
drive.
Next steps
1. Install the Side cover.
2. Follow the procedure in Working inside your computer.

Solid-state drive

Removing the M.2 2230 PCIe solid-state drive
Prerequisites
1. Follow the procedure in Before working on your computer.
2. Remove the Side cover.
About this task
The following images indicate the location of the solid-state drive and provide a visual representation of the removal procedure.
26 Disassembly and reassembly