Table 2. Screw list(continued)
Component
3.5 in. hard-drive
System board
Side cover
Removing the side cover
Prerequisites
1. Follow the procedure in before working inside your computer.
NOTE:
Ensure that you remove the security cable from the security-cable slot (if applicable).
About this task
The following images indicate the location of the side panels and provide a visual representation of the removal procedure.
Steps
1. Slide the release latch to release the cover from the computer.
2. Remove the two screws (6x32) that secures the side cover to the computer.
3. Slide the side cover towards the front of the computer and lift the cover away from the computer.
14
Disassembly and reassembly
Screw type
#6-32
#6-32
M2x4
Quantity
Image
4
8
1