Dell Vostro 3888 Service Manual page 28

Steps
1. Align the notch on the solid-state drive with the tab on the solid-state drive connector.
2. Insert the solid-state drive at a 45-degree angle into the slot on the system board.
3. Replace the screw (M2X3) to secure the M.2 PCIe solid-state drive to the system board.
Next steps
1. Install the Side cover.
2. Follow the procedure in After working on your computer.
Removing the M.2 2280 PCIe solid-state drive
Prerequisites
1. Follow the procedure in before working inside your computer.
2. Remove the side cover.
About this task
The following images indicate the location of the solid-state drive and provide a visual representation of the removal procedure.
28 Disassembly and reassembly