Certificates; Declaration Of Conformity - Viessmann Vitosol 200-T Service Instructions Manual

Declaration of conformity

We, Viessmann Werke GmbH&Co KG, D-35107 Allendorf, confirm as sole respon-
sible body that the products Vitosol 200-T, type SP2A and Vitosol 300-T,
type SP3B comply with the following standards:
DIN 1055-1: 2002-06
DIN 1055-4: 2005-03
DIN 1055-5: 2005-07
EN 12975 to Solar KEYMARK
In accordance with the following directives, this product is designated with _:
2006/95/EC
2004/108/EC
97/23/EC
Details according to the Pressure Equipment Directive (97/23/EC):
■ Heated pressure equipment
■ Class I according to appendix II, diagram 5
■ Module A according to appendix III
■ Identification of individual vessels with a content of less than 2 litres as an assembly
according to article 3 (2)
The pressure vessel was tested without fitted equipment (safety equipment).
The pressure vessel must be equipped in accordance with current national regula-
tions prior to installation and commissioning.
The product characteristics determined as system values for the product Vitosol as
part of EC type testing according to the Efficiency Directive (see specification
table), can be utilised to assess the energy consumption of heating and ventilation
equipment to DIN V 4701-10 which is specified by the EnEV [Germany].
Allendorf, 01 December 2012 Viessmann Werke GmbH&Co KG
Authorised signatory Manfred Sommer

Certificates

21