Declaration of conformity
We, Viessmann Werke GmbH & Co KG, D-35107 Allendorf, declare as sole
responsible body, that the products
Vitosol 200-T and 300-T
conform to the following standards:
DIN 1055
EN 12975
In accordance with the following directives, these products are designated _:
2006/95/EC
89/336/EEC
97/23/EC
Details according to the Pressure Equipment Directive (97/23/EC):
■ Heated pressure equipment
■ Class I according to appendix II, diagram 5
■ Module A according to appendix III
■ Identification of individual devices with a content of less than 2 litres as assembly
according to article 3 (2), subject to the installation of at least one pair
The pressure device was tested without fitted equipment (safety assembly).
The pressure vessel must be equipped in accordance with current national
requirements before installation and commissioning.
The product characteristics determined as system values for the Vitosol
product as part of EC type testing according to the Efficiency Directive (see
specification table) can be used for the energy assessment of heating and ventilation
equipment to DIN V 4701-10.
Allendorf, 1 November 2008
Viessmann Werke GmbH&Co KG
pp. Manfred Sommer
Certificates
19