Caring For The Filters - Whirlpool MH6700XW Use & Care Manual

Whirlpool microwave/hood combination use and care guide mh6700xw, mh6701xw (white)
Table of Contents

Advertisement

Caring for the Filters
The grease
filters should be removed
and cleaned
often, at least once a month. NOTE: if your
microwave
hood combination
is installed
to recirculate
air, the charcoal
filter (Part No.
4158313) should
be replaced
every 6-12 months. The charcoal
filter can not be cleaned.
1.
For your personal
safety,
turn off the electric
power
at the main power supply.
4. To replace
grease
filters,
slide filter in the frame slot
on the front of the opening.
Push filter upward
and push
to the rear to lock into place.
8.
Slide a new charcoal
filter
into place.
The filter should
rest at the angle
shown.
2. To remove
grease
filters,
slide each filter to the front.
Pull filters downward
and
push to the rear. The filter
will drop out.
5. To replace
charcoal
filter:
remove
the vent cover
mounting
screws.
6.
Tip the cover forward, then
lift out to remove.
3. Soak grease
filters in hot
water and a mild detergent.
Scrub and swish to remove
embedded
dirtand
grease.
Rinse well and shake to dry.
Do not use ammonia
or
place
in a dishwasher.
The aluminum
will darken.
I
I
7. Lift the back of the char-
coal filter. Slide the filter
straight out.
9. Slide the bottom of the
vent cover into place.
Push the top until it snaps
into place.
Replace
the
mounting
screws.
11.
Do not operate
the hood
without the filters in place.
10.
Turn the power
back on
at the main power
supply.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mh6701xw

Table of Contents