Replacing The Cooktop And Oven Lights - Whirlpool MH6700XW Use & Care Manual

Replacing the Cooktop and Oven Lights
Fire Hazard
Use only candelabra base bulbs, 30 -watt maximum. Failure to do so
could result in fire.
The Cooktop light:
Electrical Shock Hazard
Turn off power at main
power &pply before re-
placing the light bulb.
Failure to do so could re-
suit in electrical shock.
2.
Remove the five screws
holding the bottom panel
in place.
3. Lower the front of the
panel. Slide the panel
forward to remove.
The Oven light:
Electrical Shock Hazard
Turn off power at main
power supply before re-
placing the light bulb.
Failure to do so could re-
sult In electrlcal shock.
5. Slide bulb holder out, then
turn towards front to
remove bulb from oven.
2.
Remove the vent cover
mounting screws.
3. Tip the cover forward, then
lift out to remove.
6.
We recommend replacing
bulb with candelabra-base
30-watt bulb available from
your authorized WhirlpoolsM
service company (Pat-i
No.
4158432).
7. Replace the bulb holder
and mounting screw.
4. Remove shipping tape from
bulbs - if still in place -
before removing bulbs.
5. We recommend replacing
bulb(s) with candelabra-
base 30-watt bulb(s) avail-
able from your authorized
WhirlpoolSM service com-
pany (Part No. 4158432).
6.
Replace the bottom panel
in reverse order.
4. Remove bulb holder
mounting screw
8.
Slide the top of the vent
cover into place. Push the
bottom until it snaps into
place. Replace the mount-
ing screws. Turn the power
back on at main power
supply.
c