Using Auto Set; Auto Set Time - Whirlpool MH6700XW Use & Care Manual

When the cooking time ends, "End" will
show on the Display and 4 beeps will
sound. (You can stop the beeping by
opening the door or by touching
CANCEL.] "End" will remain on the
Display and a reminder tone will
sound every 60 seconds (to remind
you that food is left in the oven] until
the door is opened or CANCEL is
touched. The Display will then show
the time of day.
Changing the Cook Power
The Cook Power can be changed any time before touching START or during the cycle.
Touch COOK POWER.
f Touch a number for the new Cook Power.
e Touch START. The cycle will cook at the new Cook Power for the original time.
OR...
Touch COCK POWER twice if you want to change a lower Cook Power to HIGH
Touch START.
Using AUTO SET
Auto Set TIME and TEMP are preset cooking cycles which store commonly used cooking
times and probe temperature settings.
Auto Set TIME
Auto Set TIME provides ten preset times. One to nine minutes of cooking time at HIGH
Cook Power can be set by touching TIME and the corresponding Number Pad l-9. This
provides a short-cut method for setting commonly used cooking times.
The Auto Set Chart included with your microwave oven and the Auto Set Guide on the
inner door panel help you use TIME to cook various food items without having to look up
the cooking time.
A
preset time of 2 minutes, 30 seconds at HIGH Cook Power is available by touching just
the TIME Pad. The time may be changed to any time from O-99 minutes, O-99 seconds
allowing you to store your favorite cooking time and Cook Power. See page 13 for
instructions
DO THIS... THIS HAPPENS...
,. "j".~ -_I_ -. .1.- ___I --.-
---. -
1.
Put tood In the oven and
close the door.
._-_-l_lr_-_ . ., . ...". '.
" --. ,.... _
2.
Touch TIME.
(Optlon: Sklp to Step 6 If
you want to use the pre-
set cooklng tlme and
Cook Power.)
continued on next page