Microwave oven controls
There are four parts in the control section:
-The Digital Display/Clock
and Indicator
Lights
- Command
Pads
- Number
Pads
-Fan
and Light Pads
When you first plug in the oven, a tone sounds
and the Display
will show 88:88. If after you set
the Clock (page
6), the Display
again
shows
all 8's; your electricity
was off for a while.
Reset the Clock.
Instructions
for each control are covered
on the
following
pages.
Read them carefully.
Digital
Display/Clock
and Indicator
,-+ lights
When you are not
using the micro-
wave oven, it is
an accurate
Digital
Clock.
When you are using
the microwave
oven, it displays
time settings,
Indicator
Lights
and shows you what
Number
Pads you
touched.
7
Command
Pads
//
Touch Command
Pads to tell the micro-
wave oven what to do
and in what order. A
few examples:
-CLOCK
SET tells the
oven you are going
to set the clock.
-START tells the clock
to start.
See page
6 for
information
on the
tone you hear when
touching
any pad.
Each Command
Pad
(except
START and
CANCEL] lights an
Indicator
Light on the
digital
display.