Using Auto Set - Whirlpool MW8650XS Use & Care Manual

Using AUTO SE?
Auto Set TIME and TEMP are preset cooking cycles which store commonly used cooking
times and probe temperature settings.
Auto Set TIME
Auto Set TIME provides ten preset times. One to nine minutes at HIGH cook power can
be set by touching TIME and the corresponding number padl-9. This provides a short-cut
method for setting commonly used cooking times.
The AUTO SET chart included with your microwave oven and the AUTO SET guide on the
inner door panel help you use TIME to cook various food items without having to look up
the cooking times.
A preset time of 2 minutes, 30 seconds at HIGH cook power is available by touching just
the TIME pad. The time may be changed to any time from O-99 minutes, O-99 seconds
allowing you to store your favorite cooking time and Cook Power. See page 12 for
instructions.
DO THIS...
1.
Put food in the oven and
close the door.
2. Touch TIME
(Option: Skip to step 6 if
you want to use the pre-
set cooking time and
Cook Power.)
3. Touch a Number Pad for
the new cooking time you
want from 1 to 9 minutes.
4.
Touch COOK POWER.
(Option: Skip to step 6 if
you want to cook at high
power.)
THIS HAPPENS...
The AUTO SET Indicator Light will
come on and the Display will show
2 minutes, 30 seconds (or the
time you have set as your favorite
cycle).
The Display will show what you
touched in even minutes. This
example shows 4 minutes.
The COOK POWER Indicator Light will
come on and the Display will show
"P-HI:' This shows the oven is pre-
programmed to cook at full [HIGH)
power.
continued on next page