Table of Contents
Advertisement
9.3.3 Electrical diagram Rider 216 AWD
9.3.4 To replace the main fuse
A blown fuse is identified by a burned connector.
1. Open the engine cover. The main fuse is in a holder
in front of the battery.
2. Pull the fuse from the holder.
3. Replace the blown fuse with a new fuse of the same
type. Refer to
Technical data on page 59 .
4. Attach the covers.
If the main fuse blows again a short period after you
replace it, there is a short circuit. Repair the short circuit
before you operate the product again.
934 - 002 - 25.06.2019
9.3.5 To replace a broken lamp
For Rider 216 AWD only.
1. Remove the 2 screws and remove the lamp cover.
2. Disconnect the cables from the broken lamp.
Repair instructions - 33
Hide quick links:
Advertisement
Table of Contents
